SkinsMonkeySkinRave
πŸš€ Settings Guide

CS2 Launch Options, Config and Autoexec

Half the launch options you will find online are left over from CS:GO and do nothing in CS2. Here is what still works, where your config lives, and how to set up an autoexec.

How to Set Launch Options in CS2

  1. Open your Steam Library.
  2. Right-click Counter-Strike 2 and choose Properties.
  3. On the General tab, type your options into Launch Options, separated by spaces.
  4. Close the window and start the game. There is no save button; Steam keeps what you typed.

Options that start with a - are engine switches. Options that start with a + run a console command at start-up, so +fps_max 0 works like typing fps_max 0 in the console. Steam Support notes that some console commands cannot be used this way.

CS2 Launch Options That Still Work

OptionWhat it does
-consoleStarts the game with the developer console open
+exec autoexecRuns your autoexec.cfg at start-up
-fullscreenForces fullscreen mode
-w 1280 -h 960Forces a resolution (width and height)
-refresh 240Forces a refresh rate; match your monitor
+fps_max 0Sets the FPS cap at start (0 = no limit)
-vulkanUses Vulkan instead of DirectX 11; results vary by PC
-highStarts CS2 at high CPU priority; causes problems on some PCs
-languageSets the game language, for example -language english
-joyTurns controller input back on (ignored by default since May 2024)

Launch Options to Skip

OptionWhy
-novidDoes nothing: CS2 has no intro video
-tickrate 128Does nothing on official servers: CS2 uses sub-tick
-nojoyRedundant: controllers are already ignored unless you add -joy
-threadsCan cause instability; the game picks thread counts itself
-insecureDisables VAC, so you cannot join Premier, matchmaking or any VAC-secured server
-allow_third_party_softwareTurns off Trusted Mode; only use it if a tool you need requires it

In October 2024 Valve also removed some command-line options that it said were meant for development only, without listing them. If an option from an old guide seems to do nothing, it probably does nothing.

-console +exec autoexec

That is all most players need. Add -fullscreen if the game keeps opening windowed, and -w/-h only if you cannot pick your resolution in the menu. Video settings themselves belong in the game: see our best CS2 settings guide.

Where CS2 Saves Your Config

CS2 keeps two kinds of config in two places:

  • Settings the game saves for you (keys, crosshair, video, everything you change in the menus) live in Steam\userdata\<your Steam ID>\730\local\cfg. Key binds are in cs2_user_keys_0_slot0.vcfg and other settings in cs2_user_convars_0_slot0.vcfg. Steam Cloud keeps a copy in the remote folder next to local.
  • Configs you write yourself, such as an autoexec or a practice config, go in Steam\steamapps\common\Counter-Strike Global Offensive\game\csgo\cfg. CS2 is installed in the old CS:GO folder, so the name is not a mistake.

The console command host_writeconfig saves your current settings to the user config straight away.

How to Make an Autoexec in CS2

An autoexec is a text file of console commands that runs every time the game starts. It is the easiest way to keep binds and settings identical across PCs, or to put them back after a reinstall.

  1. Open the game\csgo\cfg folder above. In Steam you can get to the install folder via Properties > Installed Files > Browse.
  2. Create a new text file and name it autoexec.cfg. Make sure Windows has not saved it as autoexec.cfg.txt: turn on file name extensions in File Explorer to check.
  3. Put one console command per line (see the example below) and save.
  4. Add +exec autoexec to your launch options.
  5. Start CS2. You can also run it by hand at any time by typing exec autoexec in the console.

To fill it with binds without typing them, use the binds generator: it downloads a ready autoexec.cfg.

Why add +exec if CS2 might run it anyway?

Valve's developer wiki says the start-up script runs autoexec.cfg, but guides disagree on whether CS2 picks it up reliably. Adding +exec autoexec removes the doubt.

Example CS2 Autoexec

A short, safe example. Lines starting with // are comments and are ignored.

// viewmodel: Classic preset (ZywOo and donk)
viewmodel_fov 68
viewmodel_offset_x 2.5
viewmodel_offset_y 0
viewmodel_offset_z -1.5

// HUD and radar
cl_hud_color 0
cl_radar_scale 0.4

// FPS counter and cap
cl_showfps 1
fps_max 0

echo "autoexec loaded"

Add your crosshair too: build one with the Crosshair Generator and paste its commands in. The Viewmodel Generator writes the viewmodel lines for any setup. For more commands to put in it, see our CS2 console commands guide.

Back Up Your Config

Copy the 730\local\cfg folder and your autoexec.cfg somewhere safe. To move to a new PC, put them back in the same places before you start the game, or just keep your autoexec and let it re-apply everything.

Frequently Asked Questions

What are the best launch options for CS2?

Most players need very few. A sensible set is -console (opens the console at start) and +exec autoexec (loads your autoexec). Add -fullscreen, or -w and -h to force a resolution, only if you need them.

Does -novid work in CS2?

No. -novid skipped the intro video in CS:GO. CS2 has no intro video, so the option does nothing.

Does -tickrate 128 work in CS2?

No, not for matchmaking. CS2 uses a sub-tick system rather than a tickrate you choose, so -tickrate has no effect on official servers.

Where is the CS2 cfg folder?

Custom configs like autoexec.cfg go in Steam\steamapps\common\Counter-Strike Global Offensive\game\csgo\cfg. The settings CS2 saves itself are in Steam\userdata\<your Steam ID>\730\local\cfg.

Does CS2 run autoexec.cfg automatically?

Sources disagree, so add +exec autoexec to your launch options. It makes sure the file loads every time you start the game.

Does -allow_third_party_software lower Trust Factor?

It turns off Trusted Mode so overlay and recording tools can hook into the game. Valve has not said it affects Trust Factor, but only use it if a tool you rely on needs it.

About the Author
SteamAnalyst Editorial Team
Trading and tracking CS skins since 2013. Our team monitors 40,000+ items across 40+ marketplaces with millions of daily price updates.
Last fact-checked: November 2026